AESIII

| Brochure | Site Map |

AES III wind turbines run at a rated power of 3KW, with an output voltage of 240V. The AES III is perfect for domestic use and lightweight commercial applications.The suggested battery capacity for this turbine is 12V200AH20PCS, with a Sine wave matched inverter type. AESIII can supply about 600kwh per month under the condition: average wind speed is 12m/s per day and valid wind hours is 210h per month. It can satisfy the power needs of lighting, TV, fridge, heater, air conditioner, PC etc, at home or sentry and like. Specifications:

Technical Specs:

Rated power: 3000W
Peak power: 3400W
Wind wheel diameter: 5m
Start-up wind speed: 2m/s
Cut-in wind speed: 2.5m/s
Rated wind speed: 10m/s
Stop wind speed: 25m/s
Survival wind speed: 45m/s
Rated rotate speed: 400r/m
Rated voltage: 240
Yaw Mode: Electrical
Protection level: IP54
Insulation level: B
Cooling Mode: IC0141
Operation Temperature: -40℃~60℃
Drive Mode:Direct Driven by Wheel
Adjust Speed Mode:Automatic
Adjust Direction Mode:Manual/Automatic

Turbine and Towers Specs:

Rated Rotating Rate: 220r/m
Shell Material: Steel
Blade Material: Fiber glass
Blade quantity: 3
Free stand tower: 12m

Guy Cable Tower:

Tower height: 9m
Tower Thickness: 6mm
Tower Diameter: 273mm

Note:Color of photoes may be different from real objects.

Detail Image of AESIII

Components and Annex:

1.Tower base,Pivot bolt and nut
2.Tightwires
3.Tightwire clamps
4.Turnbuckles
5.Anchor
6.Pulley
7.Bolts and nuts
8.Anemoscope
9.Anemoscope pole
10.Dogvane
11.Generator assembly
12.Dome
13.Controller
14.Ground nail
15.Tower
16.Assistant tower
17.Blades
18.Inverter

Note:(1)The cables and batteries should be purchased according to your own specific situations.
(2)Proposed battery configuration for this generators is twenty 12V100AH batteries.

During the process of installing wind turbine generator, connecting electrical wiring is a very important step. If the connection is wrong or loose, there may be unforeseen problems later. We are providing the following electrical wiring plans for your reference. It is enough to have some electrical knowledge. Meanwhile, we also hope you to notice that this map does not display controller for the reason that it has been integrated into the generator. I believe this will reduce your workload and improve system stability. We offer two maps by reason that AES 10KW can be both used in the off-grid environment, and used in the off-grid environment.

Electrical wiring map for on-grid

Electrical wiring map for off-grid

Note: (1) whether the generator can be incorporated into the power grid rests on local laws and regulations.

Packaging Size and Gross Weight:

Mainframe( including controller) : 169cm x61cm x57cm，490kg
Blades: 244cm x33.5cm x28cm，48kg
Tower( first part) : 455cm x*39cm x39cm，177kg
Tower( second part) : 455cm x*39cm x39cm，209kg

		USA:
		Tel: +1 248 449 2972 Fax: +1 248 348 5760 Email: us@averox.com
		UK:
		Tel: +44 (0) 1932 796383 Fax: + 44 (0) 1932 796672 Email: uk@averox.com
		UAE:
		Tel: +971 4 3937741 Fax: +971 4 3937742 Email: uae@averox.com